Our Facilities
Dyna Masters Inc. uses state-of-the-art Mastercam 2019 CAD/CAM software to design your parts. The design is then converted into numbers which form the coordinates of a graph that controls the equipment used in the machining process. Pieces are manufactured using the latest in vertical and horizontal machining centers.
This level of excellence allows us to quickly and easily perform three-dimensional cutting tasks. Finishing work is performed in the Turning Center and Tool Room to achieve the desired specifications, with all work thoroughly monitored by our meticulous Quality Department.
Our dedication to implementing effective Quality Management Systems (QMS) across all areas of our company is intended to improve and sustain the overall performance of our business, products and services.
Our customers benefit because we:
- Consistently produce products that meet customer and applicable statutory and regulatory requirements.
- Plan our processes by employing the Plan-Do-Check-Act (PDCA) cycle and risk-based thinking in our daily operations.
- Constantly facilitate opportunities to enhance customer satisfaction.
- Address risks and opportunities associated with quality improvement.
VERTICAL CNC MACHINING
CNC, or “computer numerical control,” machining is a manufacturing process in which pre-programmed computer software dictates the movement of a complex array of factory tools and equipment. CNC machining is used to complete complicated, three-dimensional cutting tasks with a single set of prompts.
Vertical Machining relies on rotary cutters to remove material from the production piece by employing a spindle with a vertical orientation. Here, the tools will stick straight down from the tool holder and usually cut across the top of the workpiece. Dyna Masters Inc. employs the following vertical machining equipment:
YCM NXV560A-APC Dual Pallet (Fanuc 31i control) (22” x 16” x 17”) FANUC ROBODRILL D21LiB5 (Fanuc 31i control) (30” X 16” X 12”) JOHNFORD VMC-850 (Fanuc O-M control) (30” x 18” x 20”) JOHNFORD SV-45 (Fanuc 18-M control) (45” x 20” x 25”) HYUNDAI KIA VX 400 (Fanuc OI-MC control) (30” x 18” x 20”) HYUNDAI WIA F500 (Fanuc OI-MC control) (40” x 20” x 24”) HYUNDAI WIA F400 (2) (Fanuc OI-MC control) (30” x 18” x 20”) FANUC ROBODRILL D14MiA5 (Fanuc 31i control) (20” x 16” x 12”) HYUNDAI WIA F650 PLUS (Fanuc 31i control) (60” X 29.5” X 26”)
HORIZONTAL CNC MACHINING
Horizontal Machining relies on rotary cutters to remove material from the production piece by employing a spindle that is parallel to the ground floor. The differences between vertical and horizontal machining include column structure, machine operation, spindle structure
TURNING
Turning is a machining process commonly performed using a lathe to make cylindrical parts. Here the cutting tool moves in a linear fashion while the work material itself rotates. Dyna Masters Inc. utilizes the following turning equipment:
L230LMSA HYUNDAI WIA Turning Center (8” Swing, Sub Spindle & Live Tooling)
TOOL ROOM
Dyna Masters Inc. uses the following tooling equipment to fine-tune final product specifications:
DoAll Vertical Band Saw - Programmable Grob Vertical Band Saw Chevalier Falcon GrinderQUALITY CONTROL
Our stringent, ISO-compliant quality processes produce tolerances of +/- .0002. Dyna Masters Inc. uses a variety of equipment to ensure our customer quality standards are met:
TESA-Hite Inside bore gages to 8.000” and more Master gage blocks Mitutoyo surface profilometer 18”& 24” height gages, Micrometers to 15.000”, calipers to 15.000”, Gage Pins TO 1.000” (minus pins & Deltronics) Discus Software (creates ballooned drawings and inspection forms) Gagetrak Version 7.04 Calibration Software Assorted Thread Plug and Thread Ring Gages Assorted .0001 and .0005 Indicators Mitutoyo Depth Micrometers Starrett HB 350 Optical Comparator (14” SCREEN) Brown & Sharp MicroXcel CMM (37” x 33” x 24”) WITH PCDMIS with CAD 2017 (r2)
